EM7000 Analogue Multimeter

Description

Sanwa EM7000

FET Analogue Multitester

High-sensitivity FET electronic tester with high input resistance (2.5M – 12MΩ for DCV) and 0.12μA range (DC current)

Frequency response against 40Hz to 1MHz of sine wave (AC low voltage)

Measurement of P-P value (Peak to Peak value) of square wave pulse (duty cycle 20% or higher)

Wide range resistance measurement from 0.2Ω to 200MΩ

Made in Japan

* Case is sold separately

 

Function	Measuring range		Tolerance
DCV	0.3/1.2/3/12/30/120/300/1000V（2.5～12MΩ)		±3% of full scale
±DCV	±0.15/0.6/1.5/6/15/60/150/600V（2.5～12MΩ)		±7% of full scale
AC voltage rms(50/60Hz)	3V（approx.2.5MΩ）/12V（approx.1.1MΩ） 30V/120/300V（approx.800KΩ）/750V（approx.10MΩ)		±3% of full scale
ACV P-P	Sine wave	8.4V（approx.2.5MΩ/V）/33V（approx.1.1MΩ） 84/330/840V（approx.800KΩ)	±5% of full scale
	Square wave	8.4V（2.5MΩ)	±6% of full scale
	Triangle wave	8.4V（2.5MΩ)	±6% of full scale
DCA	0.12μ/0.3m/3m/30m/300m/6A		±3% of full scale
DCA	±0.06μ/±0.15m/1.5m/15m/150mA		±7% of full scale
ACA	6A		±5% of full scale
Resistance	2k/20k/200k/2M/20M/200MΩ		±3% of arc
Low-frequency output	-10～51dB		±3% of arc

Frequency characteristic	AC12V range or lower 40Hz to 1 MHz: frequency response within ±5%
Battery	R6P(AA battery)1.5Vx2, 6F22(9V manganese battery)x1
Built-in fuse	F1176 Φ5×20mm 0.5A/250V 1.5kA Ceramic fuse F1177 Φ5×20mm 6.3A/250V 1.5kA Ceramic fuse
Size/Mass	H165×W106×D46mm/Approx. 375g

※The value in (　）at DCV and ACV is input resistance